Whatever your reason, you can remove write protection from a USB drive using one of the following methods:
Remove the Write Protection Switch
Topics
If you can’t find the write protection switch on your USB drive, try another one. To protect your phone from being hacked, follow these instructions to remove write protection from all types of flash media, including SD cards and storage devices:
1. Unplug your card reader or USB drive
In one of the tiny holes on the side of your device, insert a paperclip or another small object. When you insert a protected file into it, a switch inside should flip on or feel like it clicks. Try touching whatever is inside there with an even smaller object, like an earring back or safety pin—if necessary—if this doesn’t work. Try using a different flash disc if none of those solutions work.
2. Examine Physical Injury
If the drive is physically damaged, write protection cannot be removed. Your first step should be to look for damage. Check the USB port and try inserting a different USB device. If it works, the problem lies with that particular USB port or cable rather than with the hardware or software of your computer.
3. Examine Write Protection Issues in Windows 10/8/7’s Registry Editor
The first thing you must do is to launch the Windows Registry Editor. You can access it by pressing Windows+R on your keyboard, typing “regedit” in the pop-up window, and then pressing Enter.
The second thing you need to do is look for “registry” in the Registry Editor. If there are no results, your machine doesn’t have a registry file and can’t be updated using these tools.
Right now, we’re going to seek for “write protection.” Again, in the event that none of these queries yields any information (and, let’s be honest, assuming our device has any write protections at all). Then Step 5 may be started since we would already be done with Step 4! . Let’s say, however, that some keys with the name “usbstor” are used to hold information about USB drives (like whether they have Write Protection enabled).
4. Utilise the diskpart command to format the USB drive
You can remove the write protection on a USB drive using the diskpart command in Windows.
the Administrator command prompt should be opened.
By entering diskpart and pressing Enter, Diskpart can be started. To see all of the available drives, type list disc.
You can select the appropriate USB drive by typing select disc X, where X is the number of the USB drive you supplied and that appears on your screen after running the list disc command (SD card, etc.). It may be necessary to run list volume or pick volume X depending on how many volumes are specified for each partitioned drive or SD card (1-4).
Instead of volume name, try substituting “choose volume name X,” replacing volume name with the name displayed for your external storage device when you run “list volume.” if the computer you’re using runs Mac OS. This will inform Windows of the selected partitioned storage disc. enabling later correct formatting of the drive using formatting commands like clean or format fast -f. Apply third-party software to the USB device to clean it.
5. Clearing USB
The best way to remove write protection on your USB device is to clear it with third-party software. Either free software like EaseUS Disk Copy or expensive software like Stellar Phoenix Data Recovery can be used to format your USB device.
A USB drive can be cleared, which removes all of the data previously contained on it, to make it usable for reading and writing again on any computer.
However, if it does not work, there are other options! Hackers can access your phone, so learn how to secure it. As a result, if you want to turn off the Write Protection Switch on your device, you can use third-party software or the Registry Editor.
It should be noted that deleting these switches should be done with caution because if done incorrectly. They may cause damage to your system and data loss. Physical damage repair services may be the best option for you. If none of these methods work for you (such as those offered by iSteroids).
Final Word
USB drives are commonly used for data storage and transmission. However, discovering that your USB device is write-protected can be extremely frustrating. You’ve now read some useful information on how to remove USB drive write protection. If none of these solutions work for you, read our other articles on how to format a USB drive or recover deleted files from one.
Leave a Reply